89C51RC2

80C51 Central Processing Unit
On-chip Flash Program Memory with In-System Programming (ISP) and In-Application Programming (IAP) capability
Boot ROM contains low level Flash programming routines for downloading via the UART
Can be programmed by the end-user application (IAP)
6 clocks per machine cycle operation (standard)
12 clocks per machine cycle operation (optional)
Speed up to 20 MHz with 6 clock cycles per machine cycle 40 MHz equivalent performance); up to 33 MHz with 12 clocks per machine cycle
Fully static operation
RAM expandable externally to 64 kB
4 level priority interrupt
8 interrupt sources
Four 8-bit I/O ports
Full-duplex enhanced UART
¤ Framing error detection
¤ Automatic address recognition
Power control modes
¤ Clock can be stopped and resumed
¤ Idle mode
¤ Power down mode
Programmable clock out
Second DPTR register
Asynchronous port reset
Low EMI (inhibit ALE)
Programmable Counter Array (PCA)
¤ PWM
¤ Capture/compare

The 89C51RB2/RC2/RD2 device contains a non-volatile 16kB/32kB/64kB Flash program memory that is both parallel programmable and serial In System and In-Application Programmable. In-System Programming (ISP) 89C51RB2/RC2/RD2 allows the user to download new code while the microcontroller sits in the application. In-Application Programming (IAP) means that the microcontroller fetches new program code and reprograms itself while in the system. 89C51RB2/RC2/RD2 allows for remote programming over a modem link. A default serial loader (boot loader) program in ROM allows serial In-System programming of the Flash memory via the UART without the need for a loader in the Flash code. For In-Application Programming, the user program erases and reprograms the Flash memory by use of standard routines contained in ROM.

89C51RB2/RC2/RD2 executes one machine cycle in 6 clock cycles, hence providing twice the speed of a conventional 80C51. An OTP configuration bit lets the user select conventional 12 clock timing if desired.

89C51RB2/RC2/RD2 is a Single-Chip 8-Bit Microcontroller manufactured in advanced CMOS process and is a derivative of the 80C51 microcontroller family. The instruction set is 100% compatible with the 80C51 instruction set.

89C51RB2/RC2/RD2 also has four 8-bit I/O ports, three 16-bit timer/event counters, a multi-source, four-priority-level, nested interrupt structure, an enhanced UART and on-chip oscillator and timing circuits.

The added features of the P89C51RB2/RC2/RD2 makes it a powerful microcontroller for applications that require pulse width modulation, high-speed I/O and up/down counting capabilities such as motor control.