87608AYILFT

• Fully integrated PLL
• Eight LVCMOS/LVTTL outputs, 15W typical output impedance
• Selectable crystal oscillator interface or
• LVCMOS/LVTTL REF_IN clock input
• Maximum output frequency: 166.67MHz
• Maximum crystal input frequency: 38MHz
• Maximum REF_IN input frequency: 41.67MHz
• Individual banks with selectable output dividers for generating 33.333MHz, 66.66MHz, 100MHz and 133.333MHz
• Separate feedback control for generating PCI / PCI-X frequencies from a 16.66MHz or 20MHz crystal, or 25MHz or 33.33MHz reference frequency
• VCO range: 200MHz to 500MHz
• Cycle-to-cycle jitter: 120ps (maximum), @ 3.3V
• Period jitter, RMS: 20ps (maximum)
• Output skew: 250ps (maximum)
• Bank skew: 60ps (maximum)
• Static phase offset: 160ps ± 160ps
• Voltage Supply Modes:
• VDD (core/inputs), VDDA (analog supply for PLL), VDDOA (output bank A), VDDOB (output bank B, REF_OUT, FB_OUT)
• VDD/VDDA/VDDOA/VDDOB
• 3.3/3.3/3.3/3.3
• 3.3/3.3/2.5/3.3
• 3.3/3.3/3.3/2.5
• 3.3/3.3/2.5/2.5
• -40°C to 85°C ambient operating temperature
• Available in both standard and lead-free RoHS compliant packages

Description
The ICS87608I has a selectable REF_CLK or crystal input. The REF_CLK input accepts LVCMOS or LVTTL input levels. The ICS87608I has a fully integrated PLL along with frequency configurable clock and feedback outputs for multiplying and regenerating clocks with "zero delay".

The ICS87608I is a 1:8 PCI/PCI-X Clock Generator and a member of the HiPerClockSTM family of high performance clock solutions from ICS. The ICS87608I has a selectable REF_CLK or crystal input. The REF_CLK input accepts LVCMOS or LVTTL input levels. The ICS87608I has a fully integrated PLL along with frequency configurable clock and feedback outputs for multiplying and regenerating clocks with "zero delay". The PLL's VCO has an operating range of 250MHz-500MHz, allowing this device to be used in a variety of general purpose clocking applications. For PCI/PCI-X applications in particular, the VCO frequency should be set to 400MHz. This can be accomplished by supplying 33.33MHz, 25MHz, 20MHz, or 16.66MHz on the reference clock or crystal input and by selecting ÷12, ÷16, ÷20, or ÷24, respectively as the feedback divide value. The dividers on each of the two output banks can then be independently configured to generate 33.33MHz (÷12), 66.66MHz (÷6), 100MHz (÷4), or 133.33MHz (÷3).

The ICS87608I is characterized to operate with its core supply at 3.3V and each bank supply at 3.3V or 2.5V. The ICS87608I is packaged in a small 7x7mm body LQFP, making it ideal for use in space-constrained applications.