85122

The Model 85122 family (two-post) standard loop jack, 85122-T4 (four-post) and 85122-T-IDC with sealed switching jack can be used to add lines to Bourns most popular Network Interface Devices (NIDs). Model 85122 family is a proven economical choice with standard RJ11 test jack and plug coated with environmental sealant. Model 85122-T4 and 85122-T-IDC offer longer service life and reduced maintenance. The unique design of the Bourns feed through RJ11 jack is designed to provide a significant improvement in trouble-free operation.

The RJ switching receptacle is only used during subscriber testing; in normal operation it remains sealed by closed-cell foam and is protected with an environmental sealant. This configuration is designed to prevent moisture from causing faults at the jack. Since the subscribers don't need to disconnect the RJ11 plug, there is no possibility of them failing to reconnect the plug. The four binding posts on the Model 85122-T4 and the IDC in the 85122-T-IDC allow connection of Inside Wire (IW) home runs as needed.