Specifications Symbol Parameter Min Max Unit VCC(3.3) DC supply voltage on 3.3V pins withrespect to VSS VSS - 0.5 4.6 V VCC(1.8) DC supply voltage on 1.8V pins withrespect to VSSb VSS - 0.3 2.5 V VCC(1.1) DC supply voltage on 1.1V pins withrespect to VSSb VSS - 0.2 1.7...
82571EB: Specifications Symbol Parameter Min Max Unit VCC(3.3) DC supply voltage on 3.3V pins withrespect to VSS VSS - 0.5 4.6 V VCC(1.8) DC supply voltage on 1.8V pins withrespect to VSS...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Min | Max | Unit |
VCC(3.3) | DC supply voltage on 3.3V pins with respect to VSS |
VSS - 0.5 | 4.6 | V |
VCC(1.8) | DC supply voltage on 1.8V pins with respect to VSSb |
VSS - 0.3 | 2.5 | V |
VCC(1.1) | DC supply voltage on 1.1V pins with respect to VSSb |
VSS - 0.2 | 1.7 | V |
VI / VO | 3.3V I/O Voltage 1.8V I/O Voltage 1.1V I/O Voltage |
VSS - 0.5 VSS - 0.3 VSS - 0.2 |
4.6 2.5 1.7 |
V |
IO Tstorage |
DC output current Storage temperature range |
N/A -65 |
30 140 |
mA |
ESD per MIL_STD-883 Test Method 3015, Specification 2001V Latchup Over/Undershoot: 150 mA, 125 |
N/A | VDD overstress: VDD(3.3) * (7.2 V) |
V |
a. Maximum ratings are referenced to ground (VSS). Permanent device damage is likely to occur if the ratings in this table are exceeded for an indefinite duration. These values should not be used as the limits for normal device operations.
b. During normal device power up and power down, the 1.8V and 1.1V supplies must not ramp before the 3.3V supply.