813001AGILFT

• One 3.3V or 2.5V LVPECL output pair
• Two selectable crystal oscillator interfaces for the VCXO, one differential clock or one
• LVCMOS/LVTTL clock inputs
• CLK1 and nCLK1 supports the following input types: LVPECL, LVDS, LVHSTL, SSTL, HCSL
• Crystal operating frequency range: 14MHz - 24MHz
• VCO range: 490MHz - 640MHz
• Output frequency range: 40.83MHz - 640MHz
• VCXO pull range: ±100ppm (typical)
• Supports the following applications (among others): SONET, Ethernet, Fibre Channel, HDTV, MPEG
• RMS phase jitter @ 622.08MHz (12kHz - 20MHz): 0.84 (typical)
• Supply voltage modes:
• VCC/VCCO
• 3.3V/3.3V
• 3.3V/2.5V
• 2.5V/2.5V
• -40°C to 85°C ambient operating temperature
• Available in both, standard and RoHS/Lead-Free compliant packages

Description
The ICS813001I is a dual VCXO + FemtoClock? Multiplier designed for use in Discrete PLL loops. Two selectable external VCXO crystals allow ICS813001I to be used in multi-rate applications, where a given line card can be switched, for example, between 1Gb Ethernet (125MHz system reference clock) and 1Gb Fibre Channel (106.25MHz system reference clock) modes. Of course, a multitude of other applications are also possible such as switching between 74.25MHz and 74.175824MHz for HDTV, switching between SONET, FEC and non FEC rates, etc.

The ICS813001I is a two stage device a VCXO followed by a FemtoClock? PLL. The FemtoClock? PLL can multiply the crystal frequency of the VCXO up to a range of 40.83MHz to 640MHz, with a random rms phase jitter of less than 1 ps (12kHz 20MHz). This phase jitter ICS813001I performance meets the requirements of 1Gb/10Gb Ethernet, 1Gb, 2Gb, 4Gb and 10Gb Fibre Channel, and SONET up to OC48. The FemtoClock? PLL can also be bypassed if frequency multiplication is not required. For testing/debug purposes, de-assertion of the output enable pin will place both Q0 and nQ0 in a high impedance state.