Features: • µPD75116 low voltage high-speed operation product• Instruction execution time Ta = 40 to +50 °C Ta = 40 to +60 °C VDD= 2.7 to 5.0 V 1.91 µs , 15.3 µs (operation at 4.19 MHz)2 µs, 4 µs, 32 µs (operation at 2 MHz) - VDD= ...
75116F: Features: • µPD75116 low voltage high-speed operation product• Instruction execution time Ta = 40 to +50 °C Ta = 40 to +60 °C VDD= 2.7 to 5.0 V 1.91 µs , 15.3 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Ta = 40 to +50 °C | Ta = 40 to +60 °C | |
VDD= 2.7 to 5.0 V | 1.91 µs , 15.3 µs (operation at 4.19 MHz) 2 µs, 4 µs, 32 µs (operation at 2 MHz) |
- |
VDD= 2.8 to 5.0 V | - | 1.91 µs , 15.3 µs (operation at 4.19 MHz) 2 µs, 4 µs, 32 µs (operation at 2 MHz) |
VDD= 4.5 to 5.0 V | 0.95 µs, 1.91 µs, 15.3 µs (operation at 4.19 MHz) |
PARAMETER |
SYMBOL |
TEST CONDITIONS |
RATING |
UNIT | |
Supply voltage |
VDD |
|
0.3 to +5.5 |
V | |
Input voltage |
VI1 |
Except ports 12, 13 and 14 |
0.3 to VDD+0.3 |
V | |
Ports 12 to 14 |
Internal pull-up resistor |
0.3 to VDD +0.3 |
V | ||
VI2*1 |
Opendrain |
0.3 to +11 |
V | ||
Output voltage |
VO |
|
0.3 to VDD+0.3 |
V | |
Output current |
IOH |
One pin |
15 |
mA | |
All pins |
30 |
mA | |||
Output current low |
IOL*2 |
One pin |
Peak value |
30 |
mA |
Effective value |
15 |
mA | |||
Total of ports 0, 2 to 4, 12 to14 |
Peak value |
100 |
mA | ||
Effective value |
60 |
mA | |||
Total of ports 5 to 9 |
Peak value |
100 |
mA | ||
Effective value |
60 |
mA | |||
Operating |
Topt |
|
40 to +60 |
°C | |
Storage |
Tstg |
|
65 to +150 |
°C |
The µPD75116F offers high-speed operation (tCY= 1.91 µs) at a low supply voltage (VDD = 2.7 V) which is not possiblewith the µPD75116.
It has the same functions as, and is pin compatible with, the µPD75116, allowing low voltage sets to be developedby making efficient use of previously developed and used software resources. Note, however, that the operatingvoltage range is different from that of the µPD75116.
A version of the µPD75116F with on-chip PROM, the µPD75P116*, is also available for evaluation during systemdevelopment.
*There are some differences in electrical specifications between the µPD75116F and the µPD75P116.
Functions are described in detail in the following User's Manual, which should be read when carrying out designwork.