Features: · 1.2V to 3.6V VCC supply operation· 3.6V tolerant inputs and outputs· tPD 3.7 ns max for 3.0V to 3.6V VCC 4.6 ns max for 2.3V to 2.7V VCC 7.4 ns max for 1.65V to 1.95V VCC· Power-off high impedance inputs and outputs· Latchup performance exceeds JEDEC 78 conditions· ESD performance: Hum...
74ALVCF322835: Features: · 1.2V to 3.6V VCC supply operation· 3.6V tolerant inputs and outputs· tPD 3.7 ns max for 3.0V to 3.6V VCC 4.6 ns max for 2.3V to 2.7V VCC 7.4 ns max for 1.65V to 1.95V VCC· Power-off high...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $2 - 2.02 / Piece
Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . -0.5V to +4.6V
DC Input Voltage (VI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . -0.5V to +4.6V
Output Voltage (VO)
Outputs 3-STATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +4.6V
Outputs Active (Note 3) . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . -0.5V to VCC + 0.5V
DC Input Diode Current (IIK)
VI < 0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA
DC Output Diode Current (IOK)
VO < 0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .-50 mA
VO > VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +50 mA
DC Output Source/Sink Current (IOL/IOL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
DC VCC or Ground Current per . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .±100 mA
Supply Pin (ICC or Ground)
Storage Temperature Range (Tstg) . . . . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
The 74ALVCF322835 low voltage 36-bit universal bus driver combines D-type latches and D-type flip-flops to allow data flow in transparent, latched and clocked modes.
Data flow is controlled by output-enable (OE), latch-enable LE), and clock (CLK) inputs. The device operates in Transparent Mode when LE is held HIGH. The device operates in clocked mode when LE is LOW and CLK is toggled.
Data of the 74ALVCF322835 transfers from the Inputs (In) to Outputs (On) on Positive Edge Transition of the Clock. When OE is LOW, the output data is enabled. When OE is HIGH the output
port is in a high impedance state.
The 74ALVCF322835 is designed with 26Ω series resistors in the outputs. This design reduces noise in applications such as memory address drivers, clock drivers, and bus transceivers/transmitters.
The 74ALVCF322835 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O capability up to 3.6V.
The 74ALVCF322835 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation.