IC GEN PROG VIDEO SYNC 20-SOIC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | Fairchild Semiconductor | ||
Type: | Video Sync | Applications: | Monitors, TV | ||
Mounting Type: | Surface Mount | Propagation Delay Time : | 60 ns | ||
Package / Case: | 20-SOIC (0.295", 7.50mm Width) | Supplier Device Package: | 20-SOIC |
The 74ACT715-RSC are 20-pin TTL-input compatible devices capable of generating Horizontal, Vertical and Composite Sync and Blank signals for televisions and monitors. All pulse widths are completely definable by the user. The devices are capable of generating signals for both interlaced and noninterlaced modes of operation. Equalization and serration pulses can be introduced into the Composite Sync signal when needed.
Four additional signals of the 74ACT715-RSC can also be made available when Composite Sync or Blank are used. These signals can be used to generate horizontal or vertical gating pulses, cursor position or vertical Interrupt signal.
The 74ACT715-RSC make no assumptions concerning the system architecture. Line rate and field/frame rate are all a function of the values programmed into the data registers, the status register, and the input clock frequency.
The 74ACT715-RSC is mask programmed to default to a Clock Disable state. Bit 10 of the Status Register, Register 0, defaults to a logic "0". This facilitates (re)programming before operation.
The 74ACT715-RSC is the same as the ACT715 in all respects except that the ACT715-R is mask programmed to default to a Clock Enabled state. Bit 10 of the Status Register defaults to a logic "1". Although completely (re)programmable, the ACT715-R version is better suited for applications using the default 14.31818 MHz RS-170 register values. This feature allows power-up directly into operation, following a single CLEAR pulse.
The 74ACT715-RSC is a type of 20-pin TTL-input compatible devices, which is able to generate Horizontal, Vertical an d Composite Sync and Blank signals for televisions and monitors. All pulse widths are completely definable by the us er. The device can generate signals for both interlaced and noninterlaced modes of operation.
Features of 74ACT715-RSC are:(1) maximum input clock frequency >130 MHz;(2)interlaced and non-interlaced form ats available;(3)separate or composite horizontal and vertical sync and blank signals available; (4)complete control of pulse width via registerprogramming;(5)all inputs are ttl compatible; (6)8 mA drive on all outputs;(7)74ACT715-RSC is mask programmed to default to a clock enable state for easier start-up into 14.31818 MHz RS170 timing.
The absolute maximum ratings and DC elecctrical characteristics of the 74ACT715-RSC can be summarized as:(1): su pply voltage is-0.5V to +7.0V;(2):DC input diode current is-20mA when VI is-0.5V,DC input diode current is+20mA wh en VI is VCC+0.5V;(3):DC input voltage is-0.5V to VCC +0.5V;(4):DC output diode current is-20mA when VO is-0.5 V,DC output diode current is+20mA when VO isVCC+0.5V;(5):DC output voltage is-0.5V to VCC +0.5V;(6):DC output source or sink current is±15 mA;(7):DC VCC or ground current is ±20 mA per output pin ;(8):storage temperature ranges from-65°C to +150°C;(9):junction temperature is 140.DC elecctrical characteristics:(1):minimum high level input voltage is 4.5V when VOUT is 0.1V or VCC-0.1V;(2):maximum low level input voltage is 4.5V when VOUT is 0.1V or VCC-0.1V;(3):maximum high level output voltage is 4.5V when IOUT is-50uA;(4):maximum input leakage current is 5.5uA when V1 is Vcc;(5):maximum quiescent supply current is 5.5uA when VIN is VCC or GND,etc.
Technical/Catalog Information | 74ACT715-RSC |
Vendor | Fairchild Semiconductor |
Category | Integrated Circuits (ICs) |
Mounting Type | Surface Mount |
Package / Case | 20-SOIC |
Type | Video Sync |
Packaging | Tube |
Applications | Monitors, TV |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | 74ACT715 RSC 74ACT715RSC |