Mounting Style
: SMD/SMT
Supply Voltage - Max
: 5.5 V
Polarity
: Non-Inverting
Input Type
: Single-Ended
Output Type
: Single-Ended
Maximum Operating Temperature
: + 85 C
Packaging
: Tube
Number of Circuits
: 8
Logic Type
: D-Type Flip-Flop
High Level Output Current
: - 32 mA
Low Level Output Current
: 64 mA
Package / Case
: TSSOP-20
Propagation Delay Time
: 5 ns
Logic Family
: 74ABT
Features: Inputs and outputs on opposite sides of package allowing easy interface with microprocessors
Useful as input or output port for microprocessors
Functionally identical to ABT374
3-STATE outputs for bus-oriented applications
Output sink capability of 64 mA, source capability of 32 mA
Guaranteed output skew
Guaranteed multiple output switching specifications
Output switching specified for both 50 pF and 250 pF loads
Guaranteed simultaneous switching, noise level and dynamic threshold performance
Guaranteed latchup protection
High impedance glitch free bus loading during entire power up and power down cycle
Non-destructive hot insertion capabilityPinout
SpecificationsStorage Temperature.......................... −65°C to +150°C
Ambient Temperature under Bias........ −55°C to +125°C
Junction Temperature under Bias ........−55°C to +150°C
VCC Pin Potential to
Ground Pin.......................................... −0.5V to +7.0V
Input Voltage (Note 2)............................ −0.5V to +7.0V
Input Current (Note 2)...................... −30 mA to +5.0 mA
Voltage Applied to Any Output
in the Disabled or
Power-Off State ....................................−0.5V to 5.5V
in the HIGH State ...................................−0.5V to VCC
Current Applied to Output
in LOW State (Max)............... twice the rated IOL (mA)
DC Latchup Source Current:
OE Pin........................................................... −150 mA
(Across Comm Operating Range)
Other Pins..................................................... −500 mA
Over Voltage Latchup (I/O) .......................................10VDescriptionThe 74ABT574CMTC is an octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition.
The device is functionally identical to the 74ABT574CMTC but has broadside pinouts.
74ABT574CMTC Data Sheet
