74ABT374CPC

Supply Voltage - Max : 5.5 V
Polarity : Non-Inverting
Input Type : Single-Ended
Output Type : Single-Ended
Maximum Operating Temperature : + 85 C
Mounting Style : Through Hole
Package / Case : PDIP-20
Packaging : Tube
Number of Circuits : 8
Logic Type : D-Type Flip-Flop
High Level Output Current : - 32 mA
Low Level Output Current : 64 mA
Propagation Delay Time : 5 ns
Logic Family : 74ABT


Features:

Edge-triggered D-type inputs
Buffered positive edge-triggered clock
3-STATE outputs for bus-oriented applications
Output sink capability of 64 mA, source capability of 32 mA
Guaranteed output skew
Guaranteed multiple output switching specifications
Output switching specified for both 50 pF and 250 pF loads
Guaranteed simultaneous switching, noise level and dynamic threshold performance
Guaranteed latchup protection
High impedance glitch free bus loading during entire power up and power down cycle
Non-destructive hot insertion capability


Pinout




Specifications

Storage Temperature.......................... −65°C to +150°C
Ambient Temperature under Bias........ −55°C to +125°C
Junction Temperature under Bias ........−55°C to +150°C
V_CC Pin Potential to
    Ground Pin.......................................... −0.5V to +7.0V
Input Voltage (Note 2)............................ −0.5V to +7.0V
Input Current (Note 2)...................... −30 mA to +5.0 mA
Voltage Applied to Any Output
    in the Disabled or
    Power-Off State ....................................−0.5V to 5.5V
    in the HIGH State ...................................−0.5V to V_CC
Current Applied to Output
    in LOW State (Max)............... twice the rated I_OL (mA)
DC Latchup Source Current:
    OE Pin........................................................... −150 mA
    (Across Comm Operating Range)
    Other Pins..................................................... −500 mA
Over Voltage Latchup (I/O) .......................................10V


Description

The 74ABT374CPC is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-STATE outputs for bus-oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all flip-flops.