74ABT16373

Features:

 Separate control logic for each byte
 16-bit version of the ABT373
 High impedance glitch free bus loading during entire power up and power down cycle
 Non-destructive hot insertion capability
 Guaranteed latch-up protection


Pinout




Specifications

Storage Temperature                                               -65 to +150
Ambient Temperature under Bias                             -55 to +125
Junction Temperature under Bias                             -55 to +150
V_CC Pin Potential to Ground Pin                                 -0.5V to +7.0V
Input Voltage (Note 2)                                                -0.5V to+7.0V
Input Current (Note 2)                                        -30 mA to +5.0 mA
Voltage Applied to Any Output
in the Disabled or
Power-Off State                                                          -0.5V to+5.5V
in the HIGH State                                                          -0.5V to V_CC
Current Applied to Output
in LOW State (Max)                                      twice the rated I_OL (mA)
DC Latchup Source Current:OE Pin                                        -350 mA
(Across Comm Operating Range)
Other Pins                                                                              -500 mA
Over Voltage Latchup (I/O)                                                           10V



Description

   The 74ABT16373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications.The device is byte controlled. The flip-flops appear transparent to the data when the Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE ) is LOW. When OE is HIGH, the outputs are in high Z state.