6N137MCL2601

The 6N137MCL2601 and MGL/HCPL-2601 single-channel optocouplers consists of a 700 nm GaAsP LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This output features an open collector, thereby permitting wired-OR outputs. The coupled parameters are guaranteed over the temperature range of 0-70°C. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan-out of An internal noise shield provides superior common mode rejection of typically 10 kV/s. The MCL/HCPL-2601 has a minimum CMR of 1 kV/s. An improved package allows superior insulation, permitting a 480 working voltage compared to industry standard 220V.

The features of 6N137MCL2601 can be summarized as (1)very high speed -10 MBit/s; (2)superior CMR - 10kV/s; (3)superior insulation - 2500V RMS 1 min; (4)double working voltage- 480V; (5)fan-out of 8 over 0-70°C; (6)logic gate output; (7)strobale output; (8)wired-OR - open collector; (9)U.L. recognized (File #E50151). It can be used in ground loop elimination, LSTTL to TTL, LSTTL or 5-volt CMOS, line receiver, data transmission, data multiplexing, switching power supplies, pulse transformer replacement, computer-peripheral interface.

The absolute maximum ratings of 6N137MCL2601 are (1)storage temperature: -55 to + 125°C; (2)operating temperature 0°C to+ 70°C; (3)lead solder temperature 260°C for 10s; (4)DC/average forward input current: 20 mA; (5)enable input voltage, (VE) (Not to exceed Vcc by more than 500 mV): 5.5V; (6)reverse input voltage: - 5.0V; (7)reverse supply voltage: -500 mV; (8)supply voltage, (Vcc): 7.0 V/1 minute maximum; (9)output current, (lo): 25 mA; (10)output voltage:7.0V; (11)collector output power dissipation: 40 mW.