6CWQ10G

Recovery Time :
Maximum Power Dissipation :
Maximum Reverse Leakage Current : 150 uA
Mounting Style : SMD/SMT
Product : Schottky Rectifiers
Operating Temperature Range : - 40 C to + 150 C
Packaging : Tube
Peak Reverse Voltage : 100 V
Configuration : Dual Common Cathode
Package / Case : DPAK (TO-252AA)
Max Surge Current : 440 A
Forward Continuous Current : 3.5 A
Forward Voltage Drop : 0.96 V at 6 A


Features:

Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability

Specifications

Parameters		6CWQ...	Units	Conditions
IF(AV)	Max. Average Forward (Per Leg) Current * See Fig. 5 (Per Device)	3.5	A	50% duty cycle @ TC = 135°C, rectangular wave form
		7
IFSM	Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7	440	A	5s Sine or 3s Rect. pulse	Following any rated load condition and with rated VRRM applied
		70		10ms Sine or 6ms Rect. pulse
EAS	Non-Repetit. Avalanche Energy (Per Leg)	5.0	mJ	TJ = 25 °C, IAS = 1 Amp, L = 10 mH
IAR	Repetitive Avalanche Current (Per Leg)	0.5	A	Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical

Description

The 6CWQ10G surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).

Features of the 6CWQ10G are:(1)popular D-PAK outline; (2)center tap configuration; (3)small foot print, surface mountable; (4)low forward voltage drop; (5)high frequency operation; (6)guard ring for enhanced ruggedness and long term reliability.In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.

The absolute maximum ratings of the 6CWQ10G can be summarized as:(1)Vrrm:100V;(2)storage temperature:40 to +150;(3)Ifsm:440A;(4)Vf:0.63V.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).

The 6CWQ10G surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters,free-wheeling diodes, battery charging, and reverse battery protection.