5962-9800103K2A

Current Transfer Ratio :
Maximum Input Diode Current :
Packaging :
Maximum Reverse Diode Voltage : 5 V
Maximum Forward Diode Voltage : 1.9 V
Minimum Operating Temperature : - 55 C
Maximum Baud Rate : 10 MBps
Maximum Operating Temperature : + 125 C
Maximum Power Dissipation : 200 mW
Package / Case : LCCC-20


Description

The DSCC SMD 5962-9800103K2A is a highest reliability Class K, two channel hermetically sealed optocoupler in a 20 Pad Leadless Ceramic Chip Carrier package with solder dipped pads. The solder cotains lead.
The 5962-9800103K2A is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade or with full MIL-PRF-38534 Class H testing from the DSCC SMD 81028. The 5962-9800103K2A is manufactured and tested on a MIL-PRF-38534 certified line and is included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Quad channel devices are available by special order in the 16-Pin DIP through-hole packages.
Each channel of 5962-9800103K2A ontains a GaAsP light emitting diode which is optically coupled to an integrated high speed photon detector. The output of the detector is an open collector Schottky clamped transistor. Internal shields provide a guaranteed common mode transient immunity specification of 1000 V/micro-second. For Isolation Voltage applications requiring up to 2500 Vdc, the 5962-9800103K2A is also available. Package styles for this die set in one, two, or four channels are 8 and 16-Pin DIP through hole, 16-Pin surface mount DIP flat pack, and 20 pad Leadless Ceramic Chip Carrier. Most 5962-9800103K2A may be purchased with a variety of lead forms and plating options. See the datasheet for details.
Because the same electrical die of 5962-9800103K2A (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities of 5962-9800103K2A give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.