High Speed Optocouplers 4.5-20Vcc 1500Vdc Hermetically sealed
5962-8876901PC: High Speed Optocouplers 4.5-20Vcc 1500Vdc Hermetically sealed
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Maximum Baud Rate : | 5 MBps | Maximum Forward Diode Voltage : | 1.8 V |
Maximum Reverse Diode Voltage : | 3 V | Maximum Power Dissipation : | 200 mW |
Maximum Operating Temperature : | + 125 C | Minimum Operating Temperature : | - 55 C |
Package / Case : | PDIP-8 |
The DSCC SMD 5962-8876901PC is a high reliability Class H two channel hermetically sealed optocoupler in an 8-Pin DIP ceramic package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details.
The 5962-8876901PC is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade or with full MIL-PRF-38534 Class Level K testing on the same DSCC SMD. This 5962-8876901PC is manufactured and tested on a MIL-PRF-38534 certified line and is included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits.
Each channel of 5962-8876901PC contains an AlGaAs light emitting diode which is optically coupled to an integrated high gain photon detector. The detector has a threshold with hysteresis which provide differential mode noise immunity and eliminates the potential for output signal chatter. The detector in the single channel units has a tri-state output stage which allows for direct connection to data buses. The output is non-inverting. The detector IC 5962-8876901PC has an internal shield that provides a guaranteed common mode transient immunity of up to 1000 V/micro-second. Improved power supply rejection eliminates the need for special power supply bypass precautions.
Package styles for this die set in one, two or four channels are 8-Pin DIP through hole, 16-Pin surface mount DIP flat pack, and 20 pad leadless ceramic chip carrier. Most 5962-8876901PC may be purchased with a variety of lead forms and plating options. See the datasheet for details.
Because the same electrical die of 5962-8876901PC (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities of 5962-8876901PC give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.