5962-0824202HPC

Maximum Forward Diode Voltage :
Maximum Reverse Diode Voltage :
Maximum Input Diode Current :
Maximum Power Dissipation :
Maximum Operating Temperature :
Minimum Operating Temperature :
Package / Case :
Packaging :
Current Transfer Ratio :
Maximum Baud Rate : 10 MBps


Description

The DSCC Class H Standard Microcircit Drawing (SMD) 5962-0824202HPC is a high reliability military grade two channel hermetically sealed 3.3V optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details. The 5962-0824202HPC is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade or with full MIL-PRF-38534 Class Level K testing. All devices are manufactured and tested on a MIL-PRF-38534 certified line and the Class H and K versions are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Each channel contains a GaAsP light emitting diode which is optically coupled to an integrated high speed photon detector. The output of the detector 5962-0824202HPC is an open collector Schottky clamped transistor. Internal shields provide a guaranteed common mode transient immunity specification of 1000 V/micro-second. Package styles for this die set in one or two channels are 8 and 16-Pin DIP through hole. The devices may be purchased with a variety of lead forms and plating options. See the datasheet for details. Because the same electrical die (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities of 5962-0824202HPC give justification for the use of data obtained from one part to represent other parts performance for reliability test results.