573102A

Features: • ROM : 4096×8 bits (LC573104A)2048×8 bits (LC573102A)• RAM : 64×4 bits• Cycle time• Port· Input port (S port, M port) : 2-port (8 pins) [Key scan input port]· Input/Ouput port : 3-port (10 pins)P0 port, P1 port 2-port (8 pins) [Key scan output port]P2 port 1-port...

product image

573102A Picture
SeekIC No. : 004233868 Detail

573102A: Features: • ROM : 4096×8 bits (LC573104A)2048×8 bits (LC573102A)• RAM : 64×4 bits• Cycle time• Port· Input port (S port, M port) : 2-port (8 pins) [Key scan input port]· Inpu...

floor Price/Ceiling Price

Part Number:
573102A
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/9

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• ROM : 4096×8 bits (LC573104A)
             2048×8 bits (LC573102A)
• RAM : 64×4 bits
• Cycle time
• Port
· Input port (S port, M port) : 2-port (8 pins) [Key scan input port]
· Input/Ouput port : 3-port (10 pins)
P0 port, P1 port 2-port (8 pins) [Key scan output port]
P2 port 1-port (2 pins) [Key scan expansion port]
[LED direct drivable port]
• Infrared remote control carrier generation circuit.
· Software-controllable remote control carrier output ON/OFF.
· Software-controllable carrier frequency and duty ratio.
<38kHz-1/3 duty, 38kHz-1/2 duty, 57kHz-1/2 duty>
(When fixed carrier signal is output, it is specified by mask option)
· 1kHz to 200kHz infrared remote control transmission carrier frequency.
(When carrier output is selected by timer at mask option, and when 455kHz CR oscillator is used)
· Infrared carrier output-dedicated terminal built-in (CA terminal).
· 108ms HALT-mode cancel signal output.
• Timer
· 16-bit software-controllable Timer
Timer input clock : Ceramic (CR) oscillation frequency (455kHz).
· 108ms HALT release request signal generation timer (Free running timer).
·Watchdog timer (changed over between USED/UNUSED by mask option)
• Sub-routine stack level
· 2 levels
• Oscillation circuit
· Ceramic (CR) oscillation circuit : 455kHz (for System clock generation), Feedback resistor built-in.
• Standby function
· HALT mode
HALT mode used to reduce current drain.
HALT mode suspends program execution.
Following shows how to release the HALT mode.
(A) System reset
(B) HALT mode release request signal.
· HOLD mode
HOLD mode stops ceramic resonator (CR). The HOLD mold can be released in two ways.
(A) System reset
(B) Apply H level input to S port pin or M port pin. (However, it is necessary to set S port or M port HOLD mode
release permission flag beforehand.)
• From of shipment
·MFP-24S (1.0mm pitch) and chip.
NOTE : When dipping in solder to mount the MFP package on board, contact SANYO for instructions.



Application

• Remote controller.
• Control of small measuring instruments



Pinout

  Connection Diagram


Specifications

Parameter Symbol Conditions Rating Unit
Supply voltage range VDD 0.3 to +7.0 V
Input voltage range VIN S1 to S4, M1 to M4, RES, P00 to P03, P10 to P13, P20, P21, CF1 (P00 to P03, P10 to P13, P20, P21 are input mode) 0.3 to VDD +0.3 V
Output voltage range VOUT CA, P00 to P03, P10 to P13, P20, P21, CF2
(P00 to P03, P10 to P13, P20, P21 are output mode)
0.3 to VDD +0.3 V
Output current
(Per 1 pin)
IOUT1 CA (per 1 pin) 25 mA
IOUT2 P00 to P03, P10 to P13 (per 1 pin) 500 A
IOUT3 P20, P21 (per 1 pin) 10 mA
IOUT4 Output pins other than listed above (per 1 pin) 500 A
Total output current
of all pins except CA
IAL All pins totalled (except for CA pin) 25 mA
Operating temperature Topr 30 to +70 °C
Storage temperature Tstg 40 to +125 °C



Description

LC573104A and LC573102A are CMOS 4-bit microcontrollers featuring low-voltage operation and low power dissipation.

Both LC573104A and LC573102A incorporate a 4-bit parallel processing ALU, 4K bytes/2K bytes ROM, a 64´4-bit RAM, a 16-bit timer, and an infrared remote control transmission carrier output circuit.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Undefined Category
Cable Assemblies
Test Equipment
Tapes, Adhesives
803
Optical Inspection Equipment
View more