54ABT573J-QML

 Inputs and outputs on opposite sides of package alloweasy interface with microprocessors
 Useful as input or output port for microprocessors
 Functionally identical to 'ABT373
 TRI-STATE outputs for bus interfacing
 Output sink capability of 48 mA, source capability of24 mA
 Output switching specified for both 50 pF and 250 pFloads
 Guaranteed latchup protection
High impedance glitch-free bus loading during entirepower up and power down
 Nondestructive hot insertion capability
Standard Microcircuit Drawing (SMD) 5962-9321901

Storage Temperature                                                −65°C to +150°C
Ambient Temperature under Bias                              −55°C to +125°C
Junction Temperature under Bias
Ceramic                                                                      −55°C to +175°C
VCC Pin Potential to
Ground Pin                                                                 −0.5V to +7.0V
Input Voltage (Note 2)                                               −0.5V to +7.0V
Input Current (Note 2)                                               −30 mA to +5.0 mA
Voltage Applied to Any Output
in the Disabled or
Power-Off State                                                          −0.5V to +5.5V
in the HIGH State                                                       −0.5V to VCC
Current Applied to Output
in LOW State (Max)                                                    Twice the rated IOL (mA)
DC Latchup Source Current                                        −500 mA
Over Voltage Latchup (I/O)                                          10V

The 54ABT573J-QML is an octal latch with buffered common LatchEnable (LE) and buffered common Output Enable (OE) inputs.This 54ABT573J-QML is functionally identical to the 'ABT373 but hasdifferent pinouts.