440N-C02076

A two-channel system, the Ferrocode setup 440N-C02076 consists of an actuator and a separate safety switch head that is connected to a monitoring control unit. The Ferrocode 440N-C02076  uses electromagnetic coding, which provides a higher level of security over magnetic coding systems. To further prevent possible override of the system, both sensor and actuator are supplied with tamper-resistant mounting hardware.

The absence of moving parts and direct physical contact between sensor and actuator eliminate mechanical wear.

A Ferrocode sensor of 440N-C02076 may be used without the control unit for low power/low risk applications. However, risks should be thoroughly evaluated prior to application of this method.

The control unit of 440N-C02076 should be used when monitoring and checking of the circuit is required. Up to 6 Ferrocode switches can be interfaced with the 110/230V control unit and up to 15Ferrocode switches with the 24V version. A control unit of 440N-C02076 may also be used in conjunction with electromechanical safety devices such as limit switches, gate interlocks and emergency stops with two contacts, 1 N.O. & 1 N.C.