Features: Triple Supervisory Circuits for DSP and Processor-Based Systems Power-On Reset Generator With Fixed Delay Time of 200 ms, No External Capacitor NeededTemperature-Compensated Voltage Reference Maximum Supply Current of 40 µA Supply Voltage Range . . . 2 V to 6 V Defined RESET Outpu...
43560: Features: Triple Supervisory Circuits for DSP and Processor-Based Systems Power-On Reset Generator With Fixed Delay Time of 200 ms, No External Capacitor NeededTemperature-Compensated Voltage Refer...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply voltage, VDD (see Note1) All other pins (see Note 1) Maximum low output current, IOL Maximum high output current, IOH Input clamp current, IIK (VI < 0 or VI > VDD) Output clamp current, IOK (VO < 0 or VO > VDD) Continuous total power dissipation Operating free-air temperature range, TA Storage temperature range, Tstg Soldering temperature |
7 V |
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE
1: All voltage values are with respect to GND. For reliable operation the device must not be operated at 7 V for more than t = 1000 h continuously.
The TPS3307 is a series of micropower supply voltage supervisors designed for circuit initialization primarily in DSP and processor-based systems, which require more than one supply voltage.
The product spectrum of the TPS3307 is designed for monitoring three independent supply voltages: 3.3 V/1.8 V/adj, 3.3 V/2.5 V/adj or 3.3 V/5 V/adj. The adjustable SENSE input allows the monitoring of any supply
voltage >1.25 V.
The various supply voltage supervisors TPS3307 are designed to monitor the nominal supply voltage as shown in the following supply voltage monitoring table.