4175

The 4175 is a very good product. If you want to use it you must learn about it rightly. Here you can know some features about it. The 4175 has four features. You ought to pay attention to them. The first feature of the 4175 is that the 4175 is designed for high frequency communications equipment where high stability over a wide temperature range is mandatory, the second feature of the 4175 is ± 4° phase match between filters. The third feature of the 4175 has a small size, the fourth feature of the 4175 is that the 4175 has a low cost. The above features are what I want to tell you.

In order to make you clear of the 4175, I am willing to show you the mechanical dimensions in inches of the 4175. Most important of all, you ought to know the length of the 4175 is 5.01. In addition, the width of the 4175 is 1.41. Last but not the least, the hight of the 4175 is 0.75.

Next I will show you some electrical specifications. The condition is 25°C, unless other is noted. The first electrical specification of the 4175 is the impedance, which is 500. The second electrical specification of the 4175 is the center frequency, which is 200 kHz. The third electrical specification of the 4175 is insertion loss, which is maximum 4 dB. The fourth electrical specification of the 4175 is the 3 dB bandwidth, which is more than 16 kHz. The fifth electrical specification of the 4175is bandwidth for 60 dB points, which isles than 40 kHz. The sixth electrical specification of the 4175 is passband ripple, which is ± 0.1 dB, the last electrical specification of the 4175 is phase at 200 kHz, which is 0 ± 2o.

At present there is not too much information about this model. If you are willing to find more about the 4175, please pay attention to our web! We will promptly update the relevant information. Thank you for being concerned of our information.