3KP Series

3KP Series are glass passivated junction transient voltage suppressors.Here you can get some information about the 3KP Series.The first one is that the plastic package has Underwriters Laboratory Flammability Classification 94V-O.
The second one is that the glass passivated chip junction is in P-600 package.The third one is that the peak pulse power is 3000W at on 10/1000s waveform.The fourth one is that it has an excellent clamping capability.The fifth one is that it has low zener impedance.The sixth one is that the repetition rate(Duty Cycle)is 0.05%.The secventh one is that it has fast response time which is typically less than 1.0 ps from 0 volts to BV min.The eighth one is that the typical I_R less than 1A above 10V.The ninth one is that the high temperature soldering guaranteed is 260/10 seconds/.375".,(9.5mm) lead length/5lbs., (2.3kg) tension.The last one is that it is compliant with EU RoHS 2002/95/EC directives.
The following is the mechanical data of 3KP Series.The case uses JEDEC P600 molded plastic.The epoxy is UL94V-O rate flame retardant.The terminals are axial leads, solderable per MIL-STD-750 and Method 2026 guaranteed..Color band denotes cathode end except bipolar.Besides,the mounting position is not limited.The weight is 0.067 gram (1.75 ounce).
You have to understand the maximum ratings if you are interested in the product.It has five maximum ratings as follows at 25 ambient temperature.The PPK (Peak Power Dissipation) is 3000 Watts at T_A =25OC, T_P =1ms.The PD (Steady State Power dissipation at T_L = 75 Lead Lengths .375", (95mm)) is 8.0 Watts.The I_FSM (Peak Forward Surge Current, 8.3ms Single Half Sine-WaveSuperimposed on Rated Load (JECED Method) ) is 400 Amps.The T_J and T_STG (Operating Junction and Storage Temperature Range) is from -55 to +175 .