Features: +19 dBm Input IP3Low LO Drive: -5 dBmConversion Gain: 11 dBNoise Figure: 9 dBSingle Positive Supply: +5V, 165 mAApplicationThe HMC380QS16G / HMC380QS16GE is ideal for:• GSM, GPRS & EDGE Infrastructure• CDMA, WCDMA Infrastructure• PHS InfrastructurePinoutSpecificatio...
380QS16GE: Features: +19 dBm Input IP3Low LO Drive: -5 dBmConversion Gain: 11 dBNoise Figure: 9 dBSingle Positive Supply: +5V, 165 mAApplicationThe HMC380QS16G / HMC380QS16GE is ideal for:• GSM, GPRS &am...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
RF / IF Input (Vdd= +5V) | +13 dBm |
LO Drive (Vdd= +5V) | +15 dBm |
Vdd (LO or IF) | +7 Vdc |
Channel Temperature | 150 |
Continuous Pdiss (T = 85) (derate 17 mW/ above 85) |
1.10 W |
Thermal Resistance (channel to ground paddle) |
59/W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
The HMC380QS16G & HMC380QS16GE are high linearity down-converter receiver ICs suitable for PCS/UMTS infrastructure applications from 1.7 - 2.2 GHz. The receiver IC is designed to support UMTS applications where a high third order intercept point is required. A passive mixer coupled with a high dynamic range IF amplifi er achieves an input IP3 of +19 dBm. The converter provides a gain of 11.5 dB and 9 dB typical single side band noise fi gure. The IC operates from a positive +5V rail consuming 165 mA of current while only requiring a -5 dBm LO drive. The design requires no external baluns. The mixer supports IF frequencies between 50 MHz and 300 MHz.