Specifications | Input Frequency | 6 MHz to 50 MHz |
| No. of Inputs | 1 |
| Temperature | I |
| Output Frequency | 250 kHz to 200 MHz |
| Input Type | Clock,Crystal |
| No. of Outputs | 10 |
| Output Type | LVCMOS |
| Voltage | 5.0 V |
| Package | QSOP 20 |
| Speed | NA |
| Core Supply Voltage (VDD) | 3.3 V |
| Output Supply Voltage (VDDO) | 3.3 V |
| Peak-to-Peak Period Jitter | ± 200 ps Pk-to-Pk |
| Spread Spectrum | No |
| VCXO | No |
| Output Style | SE |
| Input Style | Crystal |
| Max. Output Frequency | 200 MHz |
| Min. Output Frequency | 0.25 MHz |
| Max. Input Frequency | 50 MHz |
| Min. Input Frequency | 2 MHz |
| Temp. Grade | C |
DescriptionQUAD PLL FIELD PROGRAMMAB
The 348RIPLF is a field programmable clock synthesizer that generates up to nine high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal or clock input. The ICS348 has four independent on-chip PLLs and is designed to replace crystals and crystal oscillators in most electronic systems.
Using IDT VersaClock software to configure PLLs and outputs, the 348RIPLF contains a One-Time Programmable (OTP) ROM to allow field programmability. Programming features include eight selectable configuration registers and up to two sets of four low-skew outputs.
Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace multiple crystals and oscillators, saving board space and cost.
The 348RIPLF is also available in factory programmed custom versions for high-volume applications.
Packaged as 20-pin SSOP (QSOP)
Eight addressable registers
Replaces multiple crystals and oscillators
Output frequencies up to 200 MHz at 3.3 V
Input crystal frequency of 5 to 27 MHz
Input clock frequencies from 2 to 50 MHz
Up to nine reference outputs
Up to two sets of four low-skew outputs
Operating voltage of 3.3 V
Advanced, low-power CMOS process
For one output clock, use the ICS341(8-pin). For two output clocks, use the ICS342 (8-pin). For three output clocks, use the ICS343 (8-pin). For more than three outputs, use the ICS345 or ICS348
Available in Pb (lead) free package
click here for VersaClock Software page
348RIPLF Data Sheet
