Features: •Conforms to DSI Specification Version 1•4-Channel, 8-Bit Analog-to-Digital Converter (ADC)•4 Pins Configurable as Analog or Logic Inputs or as Logic Outputs•Provides Regulated +5.0 V Output for Sensor Power from Bus•Additional High-Drive Logic Output•...
33793A: Features: •Conforms to DSI Specification Version 1•4-Channel, 8-Bit Analog-to-Digital Converter (ADC)•4 Pins Configurable as Analog or Logic Inputs or as Logic Outputs•Provid...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Ratings | Symbol | Value | Unit |
ELECTRICAL RATINGS | |||
I/O Pin Voltage | VIO | -0.3 to VREGOUT + 0.5 | V |
I/O Pin Current | IIO | 5.0 | mA |
BUSIN, BUSOUT, BUSRTN, and H_CAP Voltage | VIN | -0.3 to 40 | V |
BUSIN, BUSOUT, BUSRTN, and H_CAP Current (Continuous) | VIN | 250 | mA |
ESD Protection (1) Human Body Model Machine Model |
VESD1 VESD2 |
±2000 ±200 |
V |
THERMAL RATINGS | |||
Storage Temperature | TSTG | -55 to 150 | |
Operating Junction Temperature | TJ | -40 to 150 | |
Peak Package Reflow Temperature During Reflow (2), (3) | TPPRT | Note 3. | |
Thermal Resistance Junction to Case | RJC | 150 | /W |
Notes
1.ESD1 performed in accordance with the Human Body Model (CZAP = 100 pF, RZAP = 1500 ), ESD2 performed in accordance with the Machine Model (CZAP = 200 pF, RZAP = 0 ).
2.Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may cause malfunction or permanent damage to the device.
3.Freescale's Package Reflow capability meets Pb-free requirements for JEDEC standard J-STD-020C. For Peak Package Reflow Temperature and Moisture Sensitivity Levels (MSL), Go to www.freescale.com, search by part number [e.g. remove prefixes/suffixes and enter the core ID to view all orderable parts. (i.e. MC33xxxD enter 33xxx), and review parametrics.
The 33793A is a slave Distributed System Interface (DSI) device that is optimized as a sensor interface. The device contains circuits to power sensors such as accelerometers and to digitize the analog level from the sensor. The device is controlled by commands over the DSI bus and returns measured data over the bus.