30KW

      The 30KW series is a glass passivated junction transient voltage suppressor.It has nine features.First,its plastic package has Underwriters Laboratory Flammability classification 94V-O.Secondly, it has glass passivated junction.Thirdly,the peak pulse power capability is 30000W on the condition that the waveform is 10*1000s. Fourthly,it has excellent clamping capability.Fifthly, its repetition rate (duty cycles) is 0.05%.Sixthly,the incremental surge resistance is low.seventhly, it has fast response time which is typically less than 1.0ps from 0 Volts to BV .Eigthly,the typical I_d  is less than 1A above 10V.At last,the high temperature soldering guaranteed is 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension.
      The following is about the mechanical data of the 30KW series.It is made of molded plastic over glass passivated junction.It has three terminals which are plated axial leads, solderable per MIL-STD-750 and Method 2026.Then is about the polarity.The positive end (cathode) is marked by the color band except bipolar.What's more,it can be placed anywhere.Besides,its weight is 0.07 ounce(2.1 gram).
      Then we have to understand the maximum ratings and characteristics if you want to purchase the 30KW.You have to pay attention that the ratings are normal at 25 ambient temperature unless otherwise specified.The first one is that the peak pulse power dissipation on 10x1000s waveform (P_PPM) is at lesat 30000W.The second one is that the steady state power dissipation at Tl=75 lead lengths.375", (9.5mm) (P_M(AV)) is 8.0W.The third one is that the peak forward surge current, 8.3ms  sine-wave superimposed on rated load, (JEDEC Method)(I_FSM) is 400A.The fourth one is that the operatings and storage temperature  (T_STG) ranges from -55 to 175
      There is not much information about the 30KW.If you want to get more information,please pay attention to our website,we will update timely.