30A01C

The 30A01C is low-frequency general-pupose amplifier applications. Typical applications are in low-frequency power amplifier and muting circuit.
The 30A01C has four features.The first one is that it has large current capacity.The second one is about low collector-to-emitter saturation voltage (resistance).RCE(sat) typ=0.67[IC=0.3A,IB=15mA].The third one is about ultrasmall package facilitates miniaturization in end products.The last one is about small ON-resistance(Ron).
The 30A01C has some absolute maximum ratings at Ta=25.VCBO which means collector-to-base voltage is -30 V.VCEO which means collector-to-emitter voltage is -30 V.VEBO which means emitter-to-base voltage is -5 V.IC which means collector current is -300 mA.ICP which means collector current (pulse) is -600 mA.PC which means collector dissipation is 300 mW under the condition of mounted on a glass epoxy board (20*30*1.6mm).Tj which means junction temperature is 150 .Tstg which means storage temperature is from -55 to +150 .
The electrical characteristics of 30A01C at Ta=25 is as follows.The maximum of ICBO which means collector cutoff current is -0.1 A under the condition of VCB=-30 V and IE=0.The maximum of IEBO which means emitter cutoff current is -0.1 A under the condition of VEB=-4 V and IC=0.The minimum of hFE which means DC current gain is 200 while the maximum of it is 500 under the condition of VCE=-2 V and IC=-10 mA.The typical of fT which means gain-bandwidth product is 520 MHz under the condition of VCE=-10 V and IC=-50 mA.The typical of Cob which means output capacitance is 3 pF under the condition of VCB=-10 V and f=1 MHz.The typical of VCE(sat) which means collector-to-emitter saturation voltage is -110 mV and the maximum of it is -220 mV under the condition of IC=-100 mA and IB=-5 mA.The typical of VBE(sat) which means base-to-emitter saturation voltage is -0.9 V and the maximum of it is -1.2 V under the condition of IC=-100 mA and IB=-5 mA.