2SK2359/2SK2360

      The 2SK2359, 2SK2359-Z/2SK2360, 2SK2360-Z is N-Channel MOS Field Effect Transistor designed for high voltage switching applications.The 2SK2359/2SK2360 has 3 features including Low on-resistance,2SK2359: RDS(on) = 0.9  W(VGS = 10 V, ID = 4.0 A),2SK2360: RDS(on) = 1.0  W (VGS = 10 V, ID = 4.0 A);Low Ciss Ciss = 1050 pF TYP;High Avalanche Capability Ratings.
      The absolute maximun ratings of the 2SK2359/2SK2360 are at Ta=25°C, Drain to source voltage(2SK2359/2SK2360) VDSS is 450/500V;Gate to source voltage VGSS is ±30V;drain Current ID(DC) is ±7.0A;total power dissipation is 75W;channel temperature is 150°C maxnimum;Storage temperature is -55 to +150°C.
      The 2SK2359 (1) devices are members of the Texas Instruments (TI) TMS470R1x family of gen- eral-purpose16/32-bit reduced instruction set computer (RISC) microcontrollers. The A128 microcontroller offers high performance utilizing the high-speed ARM7TDMI 16/32-bit RISC central processing unit (CPU), resulting in a high instruction throughput while maintaining greater code efficiency. The ARM7TDMI 16/32-bit RISC CPU views memory as a linear collection of bytes numbered upwards from zero. The 2SK2359 utilizes the big-endian format, where the most significant byte of a word is stored at the lowest numbered byte and the least significant byte at the highest numbered byte. The oscillator determines the frequency of the output voltage. This is defined by an external capacitor, C2. It is charged with a constant current, I, until the upper switching threshold is reached. A second current source is then activated which taps a double cur- rent, 2 I, from the charging current. The capacitor, C2 , is thus discharged by the current, I, until the lower switching threshold is reached. The second source is then switched off again and the procedure starts once more.
      During operating mode an internal generator provides an accurate voltage reference that can be used to supply up to 30mA to an external circuit. A small film capacitor (0.22µF min.), connected between this pin and GND is recommended to ensure the stability of the generator and to prevent noise from affecting the reference. This input is used as a secondary reference source for synchronization. The 2SK2360 can synchronize to the falling edge of the 8 kHz, 1.544 MHz or 2.048 MHz clocks and the rising edge of the 19.44 MHz clock. In Hardware Control, selection of the input reference is based upon the RefSel control input. This pin is internally pulled up to VDD.
      At present there is not too much information about this model.If you are willing to find more  about 2SK2359/2SK2360, please pay attention to our web! We will promptly update the relevant information.