2SD2465

      The 2SD2465 is a silicon NPN epitaxial planer type transistor,and it can be applied For low-voltage switching and Complementary to 2SB1603.The 2SD2465 has 3 feature,that is,Low collector to emitter saturation voltage VCE(sat);High-speed switching;Full-pack package superior in insulation, which can be installed to the heat sink with one screw.
      The absolute maximun ratings of the 2SD2465 at Ta=25°C unless otherwise noted having Collector to base Voltage VCBO is 40V;Collector to emitter Voltage VCEO is 20 V;Emitter to base Voltage VEBO is 5V;Collector Current (DC)IC is 4A;Junction temperature is +150°C ;Storage temperature is -55 to +150°C ;collector power Dissipation Pc(Tc=25°C) is 25W ;Peak collector current ICP is 8A etc.  
      2SD2465 is a stand-alone OSD Processor, which is used to display monitor adjustment or status information as a certain character or symbol on screen. Its basic operation includes making the R/ G/ B signal for the character or symbol by controlling the internal memory, synchronizing it with the horizontal flyback signal, and mixing it with the main video signal in the video AMP IC. The font data for making the character or symbol is stored in the internal ROM. It is accessed and controlled by the control data, transmitted from the micro controller through the I2C bus. The chip contains internal PLL circuitry, so all timing control signals, including the system clock, are synchronized with the horizontal flyback signal.Short duration test pulse used to minimize self-heating effect. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm. 12 parallel channels, total 32.6 Gbps capacity Data rate up to 2.72 Gbps per channel 850 nm VCSEL array Data I/O is CML compatible with DC blocking capacitors Link reach 300 m with 50/125 µm 500 MHz.km fiber at 2.5 Gbps Channel BER better than 10-12 Industry standard MPO/MTP ribbon fiber connector interface Pluggable MegArray® ball grid array connector Optionally available with EMI shield and external heat sink Laser class 1M IEC 60825-1:2001 compliant Power supply 3.3 V Compatible with industry MSA .
      At present there is not too much information about this model.If you are willing to find more  about 2SD2465, please pay attention to our web! We will promptly update the relevant information.