Packaging
: Bulk
Lamp Size
: T - 3 1/4
Features: 750 mA Continuous Output Current
45 V Output Sustaining Voltage
Internal Clamp Diodes
Internal PWM Current Control
Low Output Saturation Voltage
Internal Thermal Shutdown Circuitry
Half- or Quarter-Step Operation of Bipolar Stepper MotorsPinoutSpecifications at TJ 150°C
Motor Supply Voltage, VBB ................... 45 V
Output Current, I OUT
(Peak, tw 20 µs) ........................ ±1.0 A
(Continuous) .......................... ±750 mA
Logic Supply Voltage, VCC ................... 7.0 V
Logic Input Voltage Range,
VIN............................... -0.3 V to +7.0 V
Output Emitter Voltage, VE .................. 1.5 V
Package Power Dissipation,
PD ....................................... See Graph
Operating Temperature Range,
TA ................................. -20°C to +85°C
Storage Temperature Range,
TS ............................... -55°C to +150°C
DescriptionThe A2919SB and A2919SLB motor drivers are designed to drive both windings of a bipolar stepper motor or bidirectionally control two dc motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM) control of the output current to 750 mA. The outputs have been optimized for a low output-saturation voltage drop (less than 1.8 V total source plus sink at 500 mA).
For PWM current control, the maximum output current is deter-mined by the user's selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0%, 41%,67%, or 100% of the maximum level. A PHASE input to each bridge determines load current direction.
The 2919 bridges include both ground clamp and flyback diodes for protection against inductive transients. Internally generated delays prevent cross-over currents when switching current direction. Special power-up sequencing is not required. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
The A2919SB is supplied in a 24-pin dual in-line plastic batwing package with a copper lead-frame and heat sinkable tabs for improved power dissipation capabilities. The A2919SLB is supplied in a 24-lead surface-mountable SOIC. Their batwing construction provides for maximum package power dissipation in the smallest possible construc-tion. The A2919SB/SLB are available for operation from -40°C to+85°C. To order, change the suffix from 'S' to 'E'. 2919 are also available on special order for operation to +125°C. For
applications not requiring quarter-step operation, but desire lower detent or running current, the similar UDN2916B/EB/LB may be pre-ferred.
Parameters: Technical/Catalog Information | 2919 |
Vendor | JKL Components Corp. |
Category | Optoelectronics |
Accessory Type | LED or Lamps - Socket with Contacts |
For Use With/Related Products | T-3 1/4 Wedge Based Lamps |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | 2919 2919 |