Features: • 10 MHz max. clock frequency• Low-power CMOS technology:- Max. Write Current: 5 mA at 5.5V, 10 MHz- Read Current: 5 mA at 5.5V, 10 MHz- Standby Current: 5 A at 5.5V• 256 x 8-bit organization• Write Page mode (up to 16 bytes)• Sequential Read• Self-tim...
25AA020A: Features: • 10 MHz max. clock frequency• Low-power CMOS technology:- Max. Write Current: 5 mA at 5.5V, 10 MHz- Read Current: 5 mA at 5.5V, 10 MHz- Standby Current: 5 A at 5.5V• 256...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter Name | Value |
Density | 2 Kbit (x8) |
Max. Clock Freq. | 10 MHz |
Page Size (bytes) | 16 |
Write Protect | Quarter, Half, Whole Array |
Endurance | 1,000,000 |
Op. Volt Range (V) | 1.8 to 5.5 |
Temp Range (°C) | -40°C to +85°C |
The Microchip Technology Inc. 25AA020A is a 2 Kbit Serial Electrically Erasable Programmable Read-Only Memory (EEPROM). The memory is accessed via a simple Serial Peripheral Interface™ (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the 25AA020A is controlled through a Chip Select (CS) input.
Communication to25AA020A can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priorityinterrupts.
The 25AA020A is available in standard packages including 8-lead PDIP and SOIC, and advanced packages including 8-lead MSOP, 8-lead TSSOP and rotated TSSOP, 8-lead 2x3 DFN, and 6-lead SOT-23.