25878-13Z

The 25878-13Z is designed as a complete, low cost, single-chip solution for analog broadcast signal capture on the PCI bus. 25878-13Z takes advantage of the PCI-based system's high bandwidth and inherent multimedia capability. It is designed to be interoperable with any other PCI multimedia device at the component or board level. Applications include PC television, digital television, digital VCR, desktop video phone, still frame capture and VBI data service capture.

25878-13Z has many features and some are listed here. (1) NTSC/PAL/SECAM video decoding. (2) Supports capture resolutions up to 768 x 576 (full PAL). (3) On-chip PCI bus mastering and bridge functionality. (4) Supports HDTV/audio/MPEG2 transport data across PCI bus. (5) High-speed serial port support MPEG transport tream up to rates of 40Mbps. (6) High-speed parallel port supports MPEG transport streams up to 20Mbps. (7) Flexible 24-bit wide GPIO. (8) CCIR656 interface. (9) Interfaces to a Digital TV data stream from a VSB or OFDM demodulator. (10) Multiple YCrCb and RGB pixel formats and YUV planar formats supported on output. (11) Selectable pixel density: 8, 16, 24, and 32 bits per pixel. And so on.

Some absolute maximum ratings of 25878-13Z have been concluded into several points as follow. (1) Its Vaa (measured to AGND) would be max 7.00V. (2) Its Vdd (measured to GND) would be max 7.00V. (3) Its voltage on any signal pin would be min DGND-0.5V and max Vdd+0.5V. (4) Its analog input voltage would be min AGND-0.5V and max Vaa+0.5V. (5) Its ambient operating temperature would be min 0°C and max +70°C. (6) Its storage temperature range would be min -65°C and max +150°C. (7) Its junction temperatre would be max +125°C. (8) Its vapor phase soldering (15 seconds) would be max +220°C. 25878-13Z should be noted that stresses above those listed may cause permanent damage to the device. This is a stress rating only, and functional operation at these or any other conditions above those listed in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!