2422

Case Operating Temperature . . . . . . . . . . . . . . -55 to +125
Storage Temperature . . . . . . . . . . . . . . . . . . . . -55 to +125
Acceleration Over-range . . . . . . . . . . . . .. . . 2000g for 0.1 ms
Voltage on V_DD to GND . . . . . . . . . . . .. . . . . . . . -0.5V to 6.5V
Voltage on Any Pin to GND 1 . . . . . . . . . . . -0.5V to V_DD+0.5V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW

* NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at or above these conditions is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The Model 2422 triaxial accelerometer module combines three orthogonally mounted model 1210 integrated accelerometers in a rugged case for measuring accelerations in commercial/industrial environments. It is tailored for zero to medium frequency instrumentation applications. The anodized aluminum case is epoxy sealed and is easily mounted via two #8 (or M4) screws. 2422 is relatively insensitive to temperature changes and gradients. An optional initial calibration sheet (2422-CAL) and periodic calibration checking are also available.