Features: SpecificationsDescription The 2322 592 to 2322 595 has the following features including Zinc oxide disc, epoxy coated;Straight leads;Straight leads with flange (2322592 and 593 series only);Kinked leads.. 2322 592 to 2322 595 consist of a disc of low- ceramic material with two tinned sol...
2322 592 to 2322 595: Features: SpecificationsDescription The 2322 592 to 2322 595 has the following features including Zinc oxide disc, epoxy coated;Straight leads;Straight leads with flange (2322592 and 593 series only...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Surface mount multilayer surge suppressorInherent bidirectional clampingLow capacitance ...
The 2322 592 to 2322 595 has the following features including Zinc oxide disc, epoxy coated;Straight leads;Straight leads with flange (2322592 and 593 series only);Kinked leads..
2322 592 to 2322 595 consist of a disc of low- ceramic material with two tinned solid copper leads. They are coated with a layer of ochre coloured epoxy, which provides electrical, mechanical and climatic protection. The encapsulation is resistant to all cleaning solvents in accordance with IEC60068-2-45.The varistors are suitable for processing on automatic insertion and cutting and bending equipment. Varistors with flanged leads provide better positioning on printed-circuit boards (PCB) and more accurate control over component height. This is important for hand mounting and automatic insertion techniques seeFig.4.The varistors are marked with the following information:Maximum continuous RMS voltage;Series number (592, 593, 594 or 595);Manufacturers logo;Date of manufacture.The varistors are available in a number of packaging options:Bulk;On tape on reel;On tape in ammopack.The basic ordering code for each option is given in Tables3,4and5. To complete the catalogue number and to determine the required operating parameters, seeTable7.
2322 592 to 2322 595 are ideally suited for applications ranging from precision measurement instrumentation to high speed video and monitor applications. Capable of operating with as little as 1.4mA of current from a single supply ranging from 5V to 12V, dual supplies ranging from 2.5V to 5.0V, these amplifiers are also well suited for handheld, portable and battery-powered equipment. Ratio of output level with 1-kHz full-scale sine wave input, to the output level with the inputs short circuited, measured A-weighted over a 20-Hz to 20-kHz bandwidth using an audio analyzer. All performance measurements done with 20-kHz low-pass filter and, where noted, A-weighted filter. Failure to use such a filter may result in higher THD+N and lower SNR and dynamic range readings than shown in the Electrical Characteristics. The low-pass filter removes out-of-band noise, which, although not audible, may affect dynamic specification values.
2322 592 to 2322 595 specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.