213 series

Features:






Specifications






Description

      The 213 series is designed to international (IEC) standards for use globally. And the product meets the IEC 60127-2, Sheet 3 specification for Time Lag Fuses. So if you want to know more about the 213 series, you can refer to the IEC 60127-2, Sheet 3 specification for Time Lag Fuses. It is available in Cartridge and Axial Lead Form. At the same time, it is also available in ratings of 0.200 to 6.3 amperes.
      The 213 series has many electrical characteristics for different percent of Ampere Rating. When the percent is 150%, the Ampere Rating is from 0.032 to 6.3, and the minimum opening time is 60 minutes. And if the Ampere Rating is from 8 to 15, correspondingly the minimum opening time is 30 minutes. While the percent is 1000%, the Ampere Rating is from 0.032 to 6.3, correspondingly the minimum opening time is 0.01 sec and the maximum one is 0.3 sec. there are also some environmental specifications about the 213 series. When you use the product, you must limit the operating temperature not below -55°C but either not above 125°C. Thermal shock of the 213 series is MIL-STD-202F Method 107G, Test Condition B :(5 cycles -65°C to +125 °C). and the vibration is MIL-STD-202F Method 201A. the humidity is MIL-STD-202F Method 103B, Test Condition A. if you set the product in a high relative humidity (95%) and elevated temperature (40°C ), you can use it for 240 hours. The salt spray is MIL-STD-202F Method 101D, Test Condition B.
      The 213 series also has some physical specifications you must know. The materials of the 213 series are glass which makes up the body, nickel plated brass which consists of the cap and tin plated copper which forms the leads. The type of the solder ability is reference IEC 60127 second edition 2003-01 annex A.