1S2 THRU 1S10

      The 1S2 thru 1S10 (1S2,1S3,1S4,1S5,1S6,1S7,1S8,1S9,1S10) are super fast rectifiers. They all have many features: 1.Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound; 2. 1 ampere operation at TA=75 ¢J with no thermal runaway; 3.Exceeds environmental standards of MIL-S-19500/228; 4. For use in low voltage, high frequency inverters free wheeling, and polarlity protection applications.
      Here are some Mechanical Data of the 1S1 thru 1S9: 1. Case: Molded plastic R-1; 2. Terminals: Axial leads, solderable per MIL-STD-202,Method 208; 3. Polarity: Color band denotes cathode; 4.Mounting Position: Any; 5. Weight: 0.0064 ounce, 0.181 gram.
      When TA=25 ambient temperature unless otherwise specified, Maximum Ratings and Electrical Characteristics of the 1S1 thru 1S9 are as following mentioned: 1. Maximum repetitive peak reverse voltage of 1S2 is 20V, Maximum repetitive peak reverse voltage of 1S3 is 30V, and with the following are 40V, 50V, 60V, 70V, 80V, 100V; 2.Maximum RMS voltage of 1S1 is 35V, Maximum RMS voltage of 1S2 is 70V, Maximum RMS voltage of 1S3 is 105V, and with the following are 140V, 210V, 280V, 420, 560V, 700V; 3.Maximum average forward rectified current .375" (9.5mm) lead length@TA =55 of them all are 1.0 Amp; 4. Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) are the same 30.0 Amps; 5.Maximum DC reverse current at rated DC blocking voltage at TA=25 is 5.0 uA, Maximum DC reverse current at rated DC blocking voltage at TA=100 is 100uA; 6.Maximum reverse recovery time is 35 nS; 7.Operating junction temperature range is from -55 to +125; 8.Storage temperature range is from -55 to +150.