1N5518 THRU 1N5546

Our product 1N5518 THRU 1N5546 has four characteristics.
First one is that 1N5518 THRU 1N5546 is low zener noise specified. And it is low zener impedance. And it is low zener current. And then it is hermetically sealed glass package.
Here are the mechanical characteristics of the 1N5518 THRU 1N5546. The case is hermetically sealed glass case. The lead material is tinned copper clad steel. Its marking is body painted, alphanumeric. Its polarity banded end is cathode.
The maximum ratings are underneath of the 1N5518 THRU 1N5546: Its operating temperature is from -65°C to +200°C. Its storage temperature is from -65°C to +200°C .
Here are five notes of the 1N5518 THRU 1N5546 that you should recognized. NOTE 1: The JEDEC type numbers shown are-20% and +20% with guaranteed limits for only Vz, Ir, and Vf. Units with A suffix are -10% and +10% with guaranteed limits for only Vz, Ir, and Vf. NOTE 2 : Nominal zener voltage is measured with the device junction in thermal equilibrium with ambient temperature of 25 oC. NOTE 3 : The zener impedance is derivered from the 60Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current is superimposed on Izt. NOTE 4 : Reverse leakage currents are guaranteed and are measured at Vr as shown on the table. NOTE 5 : The maximum current shown is based on the maximum voltage of a 5.0%type unit, therefore, it applies only to the B suffix device.
At present there is not too much information about the 1N5518 THRU 1N5546. If you are willing to find more about 1N5518 THRU 1N5546 and 1N5283-1 thru 1N5314-1, please pay attention to our web! We will promptly update the relevant information. Our webs are: www.ChinaICMart.com and www.seekic.com Welcome to contact with us!