Features: • Electricallysimilar to the JEDEC registered 1N4728 thru 1N4764zener series • Zener voltagesavailable 3.3Vto 100V • Standard voltage tolerances are +/- 5% with A suffix and 10% with no suffix identification• Tight tolerance available in plus or minus 2%or 1% wit...
1N4728UR: Features: • Electricallysimilar to the JEDEC registered 1N4728 thru 1N4764zener series • Zener voltagesavailable 3.3Vto 100V • Standard voltage tolerances are +/- 5% with A suffix...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
• Electricallysimilar to the JEDEC registered 1N4728 thru 1N4764zener series
• Zener voltagesavailable 3.3Vto 100V
• Standard voltage tolerances are +/- 5% with"A" suffix and 10 % with no suffix identification
• Tight tolerance available in plus or minus 2%or 1% withC or D suffixrespectively
• Options for screening inaccordance with MIL-PRF-19500 for JAN,JANTX, JAN TXV, and JANS are availabe byadding MQ, MX, MV, or MSP prefixes respectively
to part numbers.
• Surface mount equivalents alsoavailable as SMAJ4728A toSMAJ4764A and SMAJ4728A to SMAJ4764A
• Plastic bodyaxial-leaded Zener equivalents are alsoavailable as 1N4728A to 1N4764A
• Steady-State Power: 1.00 watts at TEC < 125oC, or 1.00 watts at TA < 45ºC when mounted on FR4 PC board and recommended footprint as described for thermal resistance (also see Figure 1)
• Forward voltage @200 mA: 1.2 volts (maximum)
• Solder Temperatures: 260 ºC for 10 s (max)
This surface scthe 1N4728A thru 1N4764A 1N4728URregistration in the DO-41 equivalent package except that it meets the JEDEC surface mount outline DO-213AB. The 1N4728UR is an ideal selection for applications of high density and low parasitic requirementsfor voltage regulation. Standard voltage toleranceis +/- 5% with tighter tolerances available down to 1%. With its glass hermetic qualities, it may also be used for high reliability applicationswhen required by a source control drawi