Features: SpecificationsDescription 1N3070-1 includes 5 features,comprising 1N3070-1 AVAILABLE IN JAN, JANTX, AND JANTXV PER MIL-PRF-19500/169;SWITCHING DIODE;METALLURGICALLY BONDED;HERMETICALLY SEALED;DOUBLE PLUG CONSTRUCTION Life support 1N3070-1 or systems are devices or systems which, (a) are ...
1N3070-1: Features: SpecificationsDescription 1N3070-1 includes 5 features,comprising 1N3070-1 AVAILABLE IN JAN, JANTX, AND JANTXV PER MIL-PRF-19500/169;SWITCHING DIODE;METALLURGICALLY BONDED;HERMETICALLY SEA...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
1N3070-1 includes 5 features,comprising 1N3070-1 AVAILABLE IN JAN, JANTX, AND JANTXV PER MIL-PRF-19500/169;SWITCHING DIODE;METALLURGICALLY BONDED;HERMETICALLY SEALED;DOUBLE PLUG CONSTRUCTION
Life support 1N3070-1 or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
A critical component is any component of a life support 1N3070-1 or system whose failure to perform can be reasonably expected to cause the failure of the life support 1N3070-1 or system, or to affect its safety or effectiveness.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the 1N3070-1. This is a stress rating only; functional operation of the 1N3070-1 (at these or any other conditions above those listed in the operational sections of this specification) is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameter Maximum Repetitive Reverse Voltage Average Rectified Forward Current Non-repetitive Peak Forward Surge Current Pulse Width 1.0 second Pulse Width 1.0 microsecond Storage Temperature Range Operating Junction Temperature
These ratings are limiting values above which the serviceability of the 1N3070-1 may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 200 degrees C. 2) These are steady limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
These ratings are based on a maximum junction temperature of 200 degrees C.;These are steady limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
At present there is not too much information about this 1N3070-1.If you are willing to find more about 1N3070-1, please pay attention to our web! We will promptly update the relevant information.