196 series

Features:






Specifications






Description

      The 196 series is a multifunctional product which has many features that you should make it clear before you purchase this kind of product. The first feature you must know is the breaking capacity which is enhanced. The second feature you should make an understanding is that the 196 series has a visual fault indication, and this also is an important parameter for this kind of product. As a wise consumer, the third feature is about the versions which are directly solderable or plug-in. The fourth feature is that the 196 series is internationally approved, so the 196 series is an authoritative product. The last one but not the least important feature you should know is that the 196 series is available for all over the world.
      The 196 series has some specifications you had better know before you purchase it which are listed as follows. Firstly you should know is about the packaging which is Bulk (1000 pcs.) for type of 000 and Bulk (20x10 pcs.) for the type of 002 and mounted holder - Tape/Reel (1250 pcs.) on request for the type of 043. The second specification is about the materials. The tube is glass, the end caps are nickel-plated brass and the optional holders are made up of nickel-plated caps and tin-plated copper wires. As is known to all, the temperature is an important factor during operating. So making an understanding of the temperature is essential, and the operating temperature ranges from-25 to 70. What's more, you should limit the temperature between 10 to 60when in stock conditions. On yearly average, the relative humidity should not more than 75%. Without dew, the maximum value for 30 days is 95%. The fifth specification is about the vibration resistance. There are 24 cycles at 15 min each (IEC 60068-6), 10 - 60 Hz at 0.75 mm amplitude and 60 - 2000 Hz at 10 g acceleration. The sixth one is about the solderability. When the temperature is 260 ºC, it is less than 3 sec (wave) and when the temperature is 350 ºC, it is less than 1 sec (Hand). And the seventh one is the soldering heat resistance which is 260ºC, 10 sec. (IEC 60068-2-20).
      The 196 series's rated current ranges from 32mA to 8.00A and the amp code increases with the rated current. In the condition, the voltage rating is 250V and the breaking capacity is 150A / 250VAC, 50-60Hz and the cos ϕ is 1.0. At present there is not too much information about this model. If you are willing to find more about the 196 series, please pay attention to our web! We will promptly update the relevant information.