1893CKI-40LF

Specifications

Package VFQFPN 40 Speed NA Temperature I Voltage 3.3 V


Description

3.3V 10BASE-T/100BASE-TX
The 1893CKI-40LF is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3. The 1893CKI-40LF is intended for MII, Node applications that require the Auto-MDIX feature that automatically corrects crossover errors in plant wiring.

The 1893CKI-40LF incorporates Digital-Signal Processing (DSP) control in its Physical-Medium Dependent (PMD) sub layer. As a result, it can transmit and receive data on unshielded twisted-pair (UTP) category 5 cables with attenuation in excess of 24 dB at 100 MHz. With this IDT-patented technology, the 1893CKI-40LF can virtually eliminate errors from killer packets.

The 1893CKI-40LF provides a Serial-Management Interface for exchanging command and status information with a Station-Management (STA) entity.

The 1893CKI-40LF Media-Dependent Interface (MDI) can be configured to provide either half- or full duplex operation at data rates of 10 Mb/s or 100Mb/s.

The 1893CKI-40LF shares the same proven performance circuitry with the 1893CKI-40LF and is a pin-for-pin replacement of the 1893BF.
Applications: NIC cards, PC motherboards, switches, routers, DSL and cable modems, game machines, printers, network connected appliances, and industrial equipment.

Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.

Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard.

10Base-T and 100Base-TX IEEE 8802.3 compliant

Single 3.3V power supply

Highly configurable, supports:
- Media Independent Interface (MII)
- Auto-Negotiation with Parallel detection
- Node applications, managed or unmanaged
- 10M or 100M full and half-duplex modes
- Loopback mode for Diagnostic Functions
- Auto-MDI/MDIX crossover correction

Low-power CMOS (typically 400 mW)

Power-Down mode typically 21mW

Clock and crystal supported

Fully integrated, DSP-based PMD includes:
- Adaptive equalization and baseline-wander correction
- Transmit wave shaping and stream cipher scrambler
- MLT-3 encoder and NRZ/NRZI encoder

Small footprint 48-pin 300 mil. SSOP package

Also available in small footprint 56-pin 8x8 MLF2 package

Available in Industrial Temp and Lead Free