Number of Transceivers
:
Packaging
:
Product
: Ethernet Transceivers
Data Rate
: 10/100 Mbps
Maximum Operating Temperature
: + 70 C
Supply Voltage - Max
: 3.47 V
Supply Voltage - Min
: 3.14 V
Standard Supported
: IEEE 802.3
Supply Current (Max)
: 160 mA
Package / Case
: SSOP-48
Specifications Package | SSOP 48 |
Speed | NA |
Temperature | C |
Voltage | 3.3 V |
Description3.3V 10BASE-T/100BAS
The 1893AFLF is a lower cost, re-packaged version of the ICS1893Y-10. The 1893AFLF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The 1893AFLF uses the same proven silicon as the ICS1893Y-10 but offers a lower cost solution by using a lower cost 300 mil. 48-lead SSOP package.
The 1893AFLF uses the same twisted-pair transmit and receive circuits as the ICS1893Y-10, and the same recommended board layout techniques apply to the 1893AFLF.
The 1893AFLF is intended for Node applications using the standard MII interface to the MAC.
Single 3.3V power supply
Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.
DSP-based baseline wander correction to virtually eliminate killer packets
Low-power, 0.35-micron CMOS (typically 400 mW)
Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard
10Base-T and 100Base-TX IEEE 802.3 compliant
Clock or crystal supported
Media Independent Interface (MII) supported
Managed or Unmanaged Applications
10M or 100M Half and Full Duplex Modes
Auto-Negotiation with Parallel detection for Legacy products
Fully integrated, DSP-based PMD includes: Adaptive equalization and baseline wander correction Transmit wave shaping and stream cipher scrambler MLT-3 encoder and NRZ/NRZI encoder
Loopback mode for Diagnostic Functions
Small footprint 48-pin 300 mil SSOP package.
Available in Industrial Temperature and Lead Free packaging.