Pinout
Specifications
| Density |
1K bit (x8) |
| Max. Clock Freq. |
100 kHz |
| Page Size (bytes) |
16 |
| Write Protect |
Quarter, Half, Whole Array |
| Endurance |
1,000,000 |
| Op. Volt Range (V) |
1.8 to 5.5 |
| Temp Range (°C) |
-40°C to +85°C |
DescriptionThe 11AA010 is designed as one kind of 1 Kbit through 16 Kbit Serial Electrically Erasable PROM device that is available in standard packages including 8-lead PDIP and SOIC, and advanced packaging including 3-lead SOT-23, 3-lead TO-92, 4-lead Chip Scale, 8-lead TDFN, and 8-lead MSOP.
Features of the 11AA010 are:(1)Single I/O, UNI/O Serial Interface Bus; (2)128 x 8 through 2,048 x 8 Bit Organizations; (3)Schmitt Trigger Inputs for Noise Suppression; (4)Output Slope Control to Eliminate Ground Bounce; (5)100 kbps Max. Bit Rate ?Equivalent to 100 kHz Clock Frequency; (6)Self-Timed Write Cycle (including Auto-Erase); (7)Page-Write Buffer for up to 16 Bytes; (8)Pb-Free and RoHS Compliant; (9)Block Write Protection: Protect none, 1/4, 1/2 or all of array; (10)Built-in Write Protection: Power-on/off data protection circuitry and Write enable latch.etc.
The absolute maximum ratings of the 11AA010 can be summarized as:(1)VCC: 6.5 V;(2)All inputs and outputs w.r.t. VSS: -0.6V to VCC +1.0V;(3)Storage temperature: -65°C to +150°C;(4)Ambient temperature with power applied: -40°C to +125°C;(5)ESD protection on all pins: >/= 4 kV.
The electrical characteristics of the 11AA010 can be summarized as:(1)High-level input voltage: 0.7Vcc to Vcc+1 V;(2)Low-level input voltage: -0.3 to 0.3 Vcc V;(3)Hysteresis of Schmitt Trigger inputs (SCIO): 0.05Vcc V;(4)High-level output voltage: Vcc-0.5 V;(5)Low-level output voltage: 0.4 V;(6)Output current limit: +/-4 mA;(7)Input leakage current: ±1 uA;(8)Standby Current: 5 uA;(9)Idle Mode Current: 50 uA. If you want to know more information about the 11AA010, please download the datasheet in www.seekic.com or www.chinaicmart.com .
11AA010 Data Sheet
