08051C103JA72A

       High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chips capacitors meet these performance characteristics and are designed for applications such as snubbers in high frequency power converters, resonators in SMPS, and high voltage coupling/DC blocking. These high voltage chip designs exhibit low ESRs at high frequencies.arger physical sizes than normally encountered chips are used to make high voltage chips. These larger sizes require that special precautions be taken in applying these chips in surface mount assemblies. This is due to differences in the coefficient of thermal expansion (CTE) between the substrate materials and chip capacitors. Apply heat at less than 4°C per second during the preheat. Maximum preheat temperature must be within 50°C of the soldering temperature.
      
      The solder temperature should not exceed 230°C. Chips 1808 and larger to use reflow soldering only. Capacitors with X7R Dielectrics are not intended for AC line filtering applications.Contact plant for recommendations. Capacitors may require protective surface coating to prevent external arcing.

        Basic Construction 08051C103JA72A is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two  opposite surfaces of the ceramic dielectric. This simple
       structure requires a considerable amount of sophistication,both in material and manufacture, to produce 08051C103JA72A in the quality and quantities needed in today's electronic equipment.