04025C471KAT2A

Voltage Rating : 50 Volts
Operating Temperature Range : - 55 C to + 125 C
Packaging : Reel
Tolerance : 10 %
Temperature Coefficient / Code : X7R
Case Code - in : 0402
Case Code - mm : 1005
Product : General Type MLCCs
Capacitance : 470 pF


Description

The 04025C471KAT2A is designed as one kind of 16 amp, wide ouput range, non-Isolated DC/DC converter that is used predominately in DPA systems using a front end DC/DC high power brick and can be programmed to a variety of output voltages through the use of a single resistor.

Features of the 04025C471KAT2A are:(1)Available in both vertical and horizontal mounting;(2)Open frame construction maximizes air flow cooling;(3)Total weight: 0.30 oz. (9.4 g), lower mass greatly reduces vibration and shock problems;(4)Industry standard SIP pin-out configuration;(5)Output over-voltage protection protects load from damaging voltages (>4.4V);(6)TUV certified to EN60950;(7)On-board input and output filter capacitor;(8)No minimum load requirement means no preload resistors required;(9)Input under-voltage lockout disables converter at low input voltage conditions;(10)Board and plastic components meet UL94V-0 flammability requirements.

The absolute maximum ratings of the 04025C471KAT2A can be summarized as:(1)Operating Temperature: -40 to 105 °C;(2)Storage Temperature: -55 to 125 °C;(3)Voltage at ON/OFF input pin (N, O options): -3 to 6.5 V;(4)Voltage at ON/OFF input pin (P option): -0.5 to Vin + 0.3 V;(5)Input Voltage Non-Operating: 6.0 V;(6)Input Voltage Operating: 3.0 to 5.5 V;(7)Input Voltage Operating Transient Protection: 7.0 V.

The electrical characteristics of the 04025C471KAT2A can be summarized as:(1)No-Load Input Current (3.3 Vin): 80 to 105 mA;(2)Inrush Current Transient Rating: 0.1 A2s;(3)Recommended Input Fuse: 20 A;(4)Input Filter Capacitor Value: 40 F;(5)Recommended External Input Capacitance: 200 F.

Also there are some points of notes about 04025C471KAT2A that you should notice:(1)All pins are 0.025" (0.64mm) +/- 0.003 (0.076mm) square.; (2)All Pins: Material - Copper Alloy Finish - Tin over Nickel plate; (3)Vertical, horizontal, vertical with reverse pins and surface mount options (future) available; (4)Undimensioned components are shown for visual reference only; (5)All dimensions in inches (mm) Tolerances; (6)Weight: 0.30 oz. (9.4 g) typical; (7)Workmanship: Meets or exceeds IPC-A-610C Class II. If you want to know more information such as the electrical characteristics about 04025C471KAT2A, please download the datasheet in www.seekic.com or www.chinaicmart.com.

Parameters:

Technical/Catalog Information	04025C471KAT2A
Vendor	AVX Corporation (VA)
Category	Capacitors
Capacitance	470pF
Voltage - Rated	50V
Tolerance	±10%
Package / Case	0402 (1005 metric)
Temperature Coefficient	X7R
Packaging	Digi-Reel?
Features	General Purpose
Lead Spacing	-
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount, MLCC
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	04025C471KAT2A 04025C471KAT2A 478 1097 6 ND 47810976ND 478-1097-6