Published:2012/11/9 Author:muriel | Keyword: ULTRA PURE , 125KHz , SINE WAVE SIGNAL SOURCE | From:SeekIC
For some RFID systems operating at 125KHz, a very low distortion signal source reference is needed. The circuit shown on this page produces a 10-volt peak-to-peak signal into a 50-ohm load, with a distortion of only 0.01%.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/ULTRA_PURE_125KHz_SINE_WAVE_SIGNAL_SOURCE.html
Print this Page | Comments | Reading(3)
Code: