PULSE_WIDTH_MODULATOR

Published:2009/7/8 4:39:00 Author:May | From:SeekIC

In this application, the timer is connected in the monostable mode. The circuit is triggered with a continuous pulse train and the threshold voltage is modulated by the signal applied to the control voltage terminal at pin 5. This has the effect of modulating the pulse width as the control voltage varies. The figure shows the actual waveform generated with this circuit.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Pulse_width_modulator.html

Print this Page | Comments | Reading(3)