Published:2012/12/6 1:24:00 Author:muriel | Keyword: PI Filter Designer | From:SeekIC
PI Filter Designer is a simple 3 element 50 ohm input and output impedance pi filter designing application. This program allows the user to design simple lowpass filters by selecting from a variety of standard capacitor values either empirically or to suit what you have on hand. The filter 3 dB cutoff frequency and required L1 inductance are automatically calculated and displayed. In addition, the user may select an additional capacitor value to put in parallel with both caps C1 and C2. In this app XL = XC = 50 ohms impedance. No other impedances can be calculated with this program.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/PI_Filter_Designer.html
Print this Page | Comments | Reading(3)
Code: