Ozone Sterilizer (the 4th)

Published:2011/5/19 8:10:00 Author:Felicity | Keyword: Ozone Sterilizer (the 4th) | From:SeekIC

Work of the Ozone Sterilizer Circuit The ozone sterilizer circuit consists of Power circuit, timing control circuit and ozone generator circuit (showed in picture 9-101). Turn on the Timer Q and the +12V voltage will be produced after the 220V AC voltage is bucked, rectified, rectified and filtered by C1,C2,VDl-VD4 and VS. The voltage then separates into two parts. One provides power to the timing control circuit while the other one lightens VL1 after being bucked and limited by R2. When you sterilize you should press button S2 and make the ozone generator circuit work. VT intermittently conducts and makes The LC series resonant circuit operates. Then it will generate pulsed high voltage in winding W2 and VG tube produces ozone through discharging.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Ozone_Sterilizer_the_4th.html

Print this Page | Comments | Reading(3)