THREE_DECADE_15_Hz_TO_15_kHz_WIEN_BRIDGE_OSCILLATOR

Published:2009/7/10 1:26:00 Author:May | From:SeekIC

In this circuit, an LM741 op amp drives a Wien-bridge network using two zener diodes as an ampli-tude limiter. Range selection is done 'oy switch selecting the capacitors (C1 through C6) and tuning is done via a ganged pot. The output is about 8 Vpp max., depending on the setting of S2 and R6. R4 is set for maximum distortion consistent with stable output.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Oscillator_Circuit/THREE_DECADE_15_Hz_TO_15_kHz_WIEN_BRIDGE_OSCILLATOR.html

Print this Page | Comments | Reading(3)